Other Useful Features; Setting When Using External Devices; Input Source Settings; Skipping Specified Inputs - Sharp Aquos LC-32DH77E Operation Manual

Other useful features

Setting when using external
devices

Input source settings

Option
Input Select
For setting the signal type of external equipment.
Item
EXT1: Y/C, CVBS, RGB
EXT2: Y/C, CVBS
NOTE
• If no (colour) image displays, try changing to another
signal type.
• Check the operation manual of the external equipment for
the signal type.
Setup
Input Label
You can label each input source with a custom
description.
1
Press b to select the desired input source.
2
Go to "MENU" > "Setup" > "Input Label".
3
Press a/b/c/d to select each character of the
new name for the input source, and then press
OK.
DVD
A B C D E
K L M N O
U V W X Y
0 1 2 3 4 5 6 7 8 9
4
Repeat until the label is fully spelt out.
NOTE
• The label can be six characters or less.
• When you want to set an input source label of less than six
characters, select "END" to set the name.
INPUT SOURCE
TV
NOTE
• You cannot change labels if the input source is "TV" or
"USB".
32
F G H I J CLEAR
P Q R S T BACK
Z + – . _
END
EXT1
EXT2
DVD
EXT4
HDMI1
EXT6

Skipping specified inputs

Setup
Input Skip
This setting allows you to skip the SCART, HDMI or
RGB input on the Input Source Selection operation.
EXT1 (SCART)
EXT2 (SCART)
EXT4 (RGB)
HDMI1
HDMI2
HDMI3

Colour system settings

Option
Colour System
You can change the colour system to one that is
compatible with the image on the screen.
NOTE
• The factory preset value is "Auto".
• If "Auto" is selected, the colour system for each channel
is automatically set. If an image does not display clearly,
select another colour system (e.g. "PAL", "SECAM").

Additional features

Setup
Quick Start
You can reduce the TV's start-up time after turning on
the power with the remote control unit.
Item
On: The TV quickly starts up from standby. 30 W or more
of power consumption is required during standby.
Off: Power consumption is small during standby.
Y es No