Power Save Settings - Sharp Aquos LC-32DH77E Operation Manual

Basic adjustment

Power Save Settings

ECO
Energy Save
No Signal Off
No Operation Off
Sleep Timer
ECO
Energy Save
This function enables you to automatically reduce the
backlight brightness in order to decrease the power
consumption and increase the backlight life span.
Item
Standard: Reduces the backlight brightness by 20%.
Advanced: Reduces the backlight brightness by 30%.
Off: The backlight brightness is the same value of your
settings in the selected "AV MODE".
NOTE
• This function does not work when "AV MODE" is set to
"DYNAMIC (Fixed)".
E
"Energy Save" status icons
Icon
"Energy Save" is set to "Standard".
"Energy Save" is set to "Advanced".
When "Energy Save" is set to "Standard" or
"Advanced", "Energy Save" status icons appear in the
"Picture" menu and channel information windows as
shown below.
EXAMPLE
Picture
DYNAMIC
OPC
Backlight [+14]
Contrast [+30]
Brightness [0]
• When "OPC" is set to "On" or "On:Display", an "Energy
Save" status icon appears to the left of "OPC" in the
"Picture" menu.
• When "OPC" is set to "Off", an "Energy Save" status icon
appears to the left of "Backlight" in the "Picture" menu.
EXAMPLE
ATV
PAL
NICAM
Subtitle
New Information
[ Standard]
[Disable]
[Disable]
Description
[On]
+16
–16
0 +40
+30
–30
BBC1
01
I
STEREO
: Teletext Off
ECO
No Signal Off
When set to "Enable", the TV will automatically enter
standby mode if there is no signal input for 15 minutes.
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
NOTE
• Even if a TV programme finishes, this function may not
operate because of interference from other TV stations or
other signals.
ECO
No Operation Off
The TV will automatically enter standby mode if no
operations are performed during the time span you set
("30min." or "3hr.").
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
ECO
Sleep Timer
Allows you to set a time when the TV automatically
enters standby mode.
NOTE
• Select "Off" to cancel the sleep timer.
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
25