Basic Adjustment; Picture Settings - Sharp Aquos LC-32DH77E Operation Manual

Basic adjustment

Picture Settings

Picture
DYNAMIC
OPC
Backlight [+14]
Contrast [+30]
Brightness [0]
Colour [0]
Tint [0]
Sharpness [0]
Advanced
Reset
Picture
OPC
Automatically adjusts the brightness of the screen.
Item
Off: The brightness is fixed at the value set in "Backlight".
On: Automatically adjusts.
On:Display: Displays the OPC effect on the screen while
adjusting the brightness of the screen.
NOTE
• When set to "On", the TV senses the surrounding light and
automatically adjusts the backlight brightness. Make sure
no object obstructs the OPC sensor, which could affect its
ability to sense surrounding light.
Picture
Picture adjustments
Adjusts the picture to your preference with the
following picture settings.
Adjustment items
Selectable
c button
items
Backlight The screen dims
Contrast For less contrast
Brightness For less brightness
For less colour
Colour
intensity
Skin tones become
Tint
purplish
Sharpness For less sharpness
[Off]
–16 +16
0 +40
–30 +30
–30 +30
+30
–30
+10
–10
d button
The screen brightens
For more contrast
For more brightness
For more colour
intensity
Skin tones become
greenish
For more sharpness
Picture
Advanced
This TV provides various advanced functions for optimising
the picture quality.
Y
G
Film Mode
C
Active Contrast B
DNR
M
3D-Y/C
Monochrome
Range of OPC
C.M.S.-Hue
This function adjusts the hue of a selected colour using a six-
colour adjustment system.
C.M.S.-Saturation
This function increases or decreases the saturation of a
selected colour using a six-colour adjustment system.
Colour Temp.
Adjusts the colour temperature to give the best white image.
Item
High: White with bluish tone.
Mid-High: Intermediate tone between "High" and "Middle".
Middle: Natural tone.
Mid-Low: Intermediate tone between "Middle" and "Low".
Low: White with reddish tone.
100Hz
"100Hz" technology provides superior solutions for
digital display picture quality removing motion blur.
NOTE
• This effect is greater on fast moving images.
• "100Hz" will have no effect in the following cases;
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
• If images appear blurred, set the "100Hz" to "Off".
Film Mode
Automatically detects a film-based source (originally encoded
at 24 or 25 frames per second, depending on the vertical
frequency), analyses it and then recreates each still film frame
for high-definition picture quality.
f30 e30
[ 0]
f30 e30
[ 0]
f30 e30
[ 0]
f30 e30
[ 0]
f30 e30
[ 0]
23