Before Turning On The Power; Bundling The Cables - Sharp Aquos LC-32DH77E Operation Manual

Quick guide

Before turning on the power

Standard
DIN45325 plug
(IEC 169-2) 75 q
coaxial cable
Supplying power to the antenna
You must supply power to the antenna in order to receive
digitally/terrestrially broadcast stations after connecting the
antenna cable to the antenna terminal on the rear of the TV.
1 Press MENU and the "MENU" screen displays.
Press c/d to select "Setup".
2
Press a/b to select "Antenna Setup-DIGITAL", and then press
3
OK.
Press a/b to select "Supply Voltage", and then press OK.
4
Press c/d to select "On", and then press OK.
5
Mounting the TV on a wall
• This TV should be mounted on a wall only with the wall mount bracket available from SHARP (Page 42). The use
of other wall mount brackets may result in an unstable installation and may cause serious injuries.
• Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting
or mounting that results in accident or injury.
• You can ask qualified service personnel about using an optional bracket to mount the TV to a wall.
• To use this TV mounted on a wall, first remove the adhesive tape at the two locations on the rear of the TV, and then use the
screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
• When you mount the TV on a wall, you should attach the supporting post.
When using wall mount bracket AN-37AG5 or AN-52AG4
You can check the centre of the TV screen using the mark engraved on the wall mount bracket when mounting the TV on the
wall.
AN-37AG5
LC-32DH77E, LC-32DH77V: The centre of the TV screen is 13 mm below the mark "B" on the wall bracket.
AN-52AG4
LC-42DH77E, LC-42DH77V: The centre of the TV screen is at the mark "c" on the wall bracket.
LC-46DH77E, LC-46DH77V: The centre of the TV screen is at the mark "b" on the wall bracket.
LC-52DH77E, LC-52DH77V: The centre of the TV screen is 7.3 mm below the mark "f" on the wall bracket.

Bundling the cables

Bundle the cables with
8
Cable clamp
the clamp.
1 Carefully insert the CI
Module in the CI slot
with the contact side
forward.
2 The logo on the CI
Module must be
facing outward from
the rear of the TV.
Place the TV close to the
AC outlet, and keep the
power plug within reach.
AC cord
Product shape varies in some countries.