Specifications - Sharp XL-MP50H Operation Manual

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
! General
Power source AC 230 V, 50 Hz
Power Power on: 25 W
consumption
Power stand-by: 0.9 W
Dimensions Width: 160 mm (6-5/16")
Height: 240 mm (9-1/2")
Depth: 245 mm (10")
Weight 2.5 kg (5.5 lbs.)
! Amplifier
Output power PMPO: 30 W (total)
MPO: 15 W (7.5 W + 7.5 W) (DIN 45 324)
RMS: 10 W (5 W + 5 W) (DIN 45 324)
Output terminals Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Input terminals Video/Auxiliary (audio signal):
500 mV/47 k ohms
! Tuner
Frequency range FM: 87.5 - 108.0 MHz
AM: 522 - 1,620 kHz
! CD player
Type Compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency 20 - 20,000 Hz
response
Dynamic range 90 dB (1 kHz)
! Cassette deck
Frequency 50 - 14,000 Hz (normal tape)
response
Signal/noise ratio 50 dB (recording/playback)
Wow and flutter 0.35 % (DIN 45 511)
! Speaker
Type 10 cm (4") full-range speaker
Maximum input 10 W
power
Rated input power 5 W
Impedance 4 ohms
Dimensions Width: 145 mm (5-3/4")
Height: 240 mm (9-1/2")
Depth: 180 mm (7-1/16")
Weight 1.4 kg (3.1 lbs.)/each
05/3/24 XL-MP50H(H)E3.fm
XL-MP50H
ENGLISH
8
E-32
TINSZA054SJZZ