Sharp XL-MP50H Operation Manual page 18

System connections (continued)
XL-MP50H
ENGLISH
! Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
plain wire to the plus (+) terminal.
Caution:
" Do not let the bare speaker wires touch each
other.
" Use speakers with an impedance of 4 ohms or
more, as lower impedance speakers can damage
the unit.
" Do not mistake the right and the left channels.
The right speaker is the one on the right side
when you face the unit.
Placing the speaker system:
The left and right speakers have individual shapes. For best perfor-
mance, place the speakers according to the diagram below.
Left speaker
Note:
The speaker grilles are not removable.
E-7
! AC power connection
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket.
Incorrect
Wall socket
(AC 230 V, 50 Hz)
Notes:
" Unplug the AC power lead from the wall socket if the unit will not
Right speaker
be in use for a prolonged period of time.
" Never use a power lead other than the one supplied. Otherwise,
a malfunction or an accident may occur.
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
05/3/24 XL-MP50H(H)E1.fm
TINSZA054SJZZ
15