Specifications - Sharp GX-68Z Service Manual

Hide thumbs Also See for GX-68Z:
Table of Contents

Advertisement

FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE
REFER TO THE OPERATION MANUAL.
AC 11 OV- 127V/22OV-24OV, 50/60 Hz
Power source:
DC 15V (External DC input)
DC 1.5V (UM/SUM-3 or R6 x 1) (for clock/
timer)
Power consumption: 130 W
Output power:
P M P O ; 2 4 0 W (12OW + 12OW)
(AC operation)
M P O ; 1 2 0 W (6OW + 6OW)
RMS; 40W (2OW +2OW)
Input sensitivity and impedance:
CD/LINE IN; 530 mV/47 kohms
Loaded impedance: Headphones; 8 - 50 ohms
(recommended 32 ohms)
Dimensions:
Width; 290 mm (11-7/l 6" )
Height; 280 mm (1 l-l/l 6" )
Depth; 230 mm 19- 1 /16" 1
Weight:
6.4 kg (14.1 Ibs.)
Tape:
Compact cassette tape
Frequency response: 50 - 15,000 Hz (CrO, tape)
50 - 14,000 Hz (Normal tape )
Signal/noise ratio:
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
Wow and flutter:
0.25% (WRMS)
1. Turn the drum full-y in the direction @ shown in Fig. 2-l and
stretch its cord over the parts in the numerical order.
2. Then turn the tuning control shaft fully in the direction @
shown in Fig. 2-1 and fix its pointer as shown in Fig. 2-1.
Before operating the unit on mains, check the preset voltage.
If the voltage is different from your local voltage, adjust the
voltage as follows: Slide the AC power supply socket cover
by slightly loosing the screw to the visible indication of the
side of your local voltage.

SPECIFICATIONS

Frequency range:
Speakers:
Rated power:
Impedance:
Dimensions:
Weight:
STRINGING OF DIAL CORD
FM; 88 - 108 MHz
SW2; 7.3 - 22 MHz
12 cm (4-3/4" ) woofer x 2
5 cm (2" ) tweeter x 2
2 o w
4 ohms
Width; 180 mm (7-l/8" )
Height; 280 mm (11 -l/16" )
Depth; 207 mm (8-3/16" )
2.5 kg (5.5 Ibs.)/each
Specifications for this model are subject to change without
prior notice.
DIAL PDINTER
Figure Z- 1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gx-68z(bk)Cp-x9Cp-x9(bk)

Table of Contents