Extraordinary Maintenance - Smeg Oven Instructions For The User

Instructions for the user

12.EXTRAORDINARY MAINTENANCE

The oven may require extraordinary maintenance or replacement of parts
subject to wear such as gaskets, bulbs, etc. The following instructions describe
how to carry out these minor maintenance operations.
Before any intervention that requires access to live parts, disconnect the
appliance from the power supply.
If a problem cannot be resolved through ordinary maintenance or in the case of
other types of fault, contact your local technical support centre.
12.1 Replacing the light bulb
Remove the bulb protector A by turning it
anticlockwise and replace bulb B with a
similar one (25 W). Re-fit the bulb
protector A.
Use only oven bulbs (T 300°C).
12.2 Removing the door seal
For multifunction models only:
To permit thorough cleaning of the oven,
the door seal may be removed.
There are fasteners on all four sides to
attach it to the edge of the oven. Pull the
edges of the seal outwards to detach the
fasteners.
61