Maintenance And Servicing; Operating Instructions - Pacific hydrostar 66514 Set Up, Operating And Maintenance Instructions

120w fountain pump
Table of Contents

Advertisement

operating inStructionS

read the entire important
Safety information section
at the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
1.
After reading these instructions,
consider the following points before
starting the pump:
a.
Verify that the pump rests on the
floor of the fountain.
b.
Verify that the electrical connection
is 120 V~, 60 Hz.
c.
Verify that the electrical receptacle is
in good condition.
d.
Verify that water and moisture can-
not get near the power supply recep-
tacle.
e.
Verify that the pump is installed so
as to prevent running dry.
2.
To prevent tripping, run any extension
cord used away from walkways that
lead to your location.
4.
Place the Fountain Pump on a sur-
face slightly elevated (to prevent col-
lection of excessive mud), and open
either or both switches located on the
Tee Fitting System (10) by rotating
them towards the + symbol.
5.
Plug the Fountain Pump into the
power outlet. The Fountain Pump will
begin operating automatically.
6.
When not using the Fountain Pump
for a long period of time, unplug the
power cord, remove it from the water,
rinse with cold, clean, water and let it
dry before storing it inside away from
children.
SKU 66514
for technical questions, please call 1-800-444-3353.
maintenance and
SerVicing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
from accidental
operation or electric
SHock:
unplug the fountain pump
from its electrical outlet
before performing any
accessory change, inspection,
maintenance, and/or cleaning
procedures.
to preVent SeriouS
injury from tool
failure:
do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
cleaning, maintenance, and
lubrication
1.
Before eacH uSe,
general condition of the Fountain
Pump. Check for loose screws, mis-
alignment or binding of moving parts,
cracked or broken parts, damaged
electrical wiring, and any other condi-
tion that may affect its safe operation.
after uSe,
2.
of the appliance with clean, moist
cloth.
to preVent
SeriouS injury
inspect the
clean external surfaces
Page 5

Advertisement

Table of Contents
loading

Table of Contents