Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Item 68455 shown.
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15i
Advertisement
Table of Contents
Related Manuals for Pacific hydrostar 68454
Summary of Contents for Pacific hydrostar 68454
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Fluid Type
The Pump is designed for use with water with a maximum temperature of 77° F (25°C). Do not use the pump for other fluids, especially not fuels, cleaning fluids, or other chemical products. Page 2 For technical questions, please call 1-888-866-5797. Item 68454 68455 68476... -
Page 3: Specifications
(e.g. household, farming, plumbing). 2. This pump is designed for use as a basement pump. When installed in a shaft, this pump provides some protection from basement flooding. Item 68454 68455 68476 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Installation Instructions
The discharge should be kept as short as possible with a minimum number of turns. Figure B: Pump Position IMPORTANT: Do not exceed the Maximum Delivery Height of the Pump. Page 4 For technical questions, please call 1-888-866-5797. Item 68454 68455 68476... -
Page 5: Operation
3. Rinse the housing off with clean water. 2. Clean sludge and debris from the bottom of the shaft. 4. Clean fibers from inside the pump housing with a pressure washer (not included). Item 68454 68455 68476 For technical questions, please call 1-888-866-5797. Page 5... -
Page 6: Troubleshooting
4. Defective Float Switch. 4. Unplug Pump. Have qualified technician check Pump for proper operation. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 6 For technical questions, please call 1-888-866-5797. Item 68454 68455 68476... -
Page 7: Please Read The Following Carefully
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 68454 68455 68476 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 68454 and is the answer not in the manual?
Questions and answers