Pacific hydrostar 69746 Owner's Manual & Safety Instructions

Pacific hydrostar 69746 Owner's Manual & Safety Instructions

212cc gasoline powered 3 full trash pump

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
212cc GASOLINE POWERED
3" FULL TRASH PUMP
Using an engine indoors
CAN KILL YOU IN MINUTES.
Engine exhaust contains carbon monoxide.
This is a poison you cannot see or smell.
NEVER use inside
a home or garage,
EVEN IF doors and
windows are open.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Only use OUTSIDE
and far away from
windows, doors,
and vents.
Visit our website at: http://www.harborfreight.com
or engine technical support at: predator@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15a
ITEM 69746

Advertisement

Table of Contents
loading

Summary of Contents for Pacific hydrostar 69746

  • Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. REV 15a ITEM 69746 212cc GASOLINE POWERED 3" FULL TRASH PUMP Using an engine indoors CAN KILL YOU IN MINUTES.
  • Page 2: Table Of Contents

    BP-6ES; NHSP / Torch F6TC Spark Plug 0.7 - 0.8 mm Intake 0.10 - 0.15 mm Valve Clearance Exhaust 0.15 - 0.20 mm No Load Speed 3,800 RPM±100RPM Flow (Gallons/minute) Page 2 For technical questions, please call 1-888-866-5797. ITEM 69746...
  • Page 3: Safety

    It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SAVE THESE INSTRUCTIONS ITEM 69746 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 19. Parts, especially exhaust system components, prevent the tool from rolling, slipping, and tilting. get very hot during use. Stay clear of hot parts. 9. Industrial applications must follow OSHA requirements. Page 4 For technical questions, please call 1-888-866-5797. ITEM 69746...
  • Page 5: Save These Instructions

    5. Wipe up any spilled fuel and allow excess to evaporate before starting engine. To prevent FIRE, do not start the engine while the smell of fuel hangs in the air. SAVE THESE INSTRUCTIONS. ITEM 69746 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6: Setup

    Bolt Seal High Altitude Kit parts List - A part Description Bolt Main Jet 3000-6000 ft. Main Jet 6000-8000 ft. Bolt Seal Fuel Cup Seal Page 6 For technical questions, please call 1-888-866-5797. ITEM 69746...
  • Page 7 Controls Fuel Tank Cap Fuel Tank Throttle Choke Fuel Valve Engine Switch Starter Handle Oil Dipstick Priming Cap Discharge Port Intake Port Water Drain Plug Air Filter Muffler ITEM 69746 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 Strainer into the end of the suction hose (d). Use a the Intake Port (a), and turn clockwise screwdriver to tighten the Hose Clamp until secure. until fastened securely (b). Intake Port Threaded Hose Coupler Intake Strainer Page 8 For technical questions, please call 1-888-866-5797. ITEM 69746...
  • Page 9 NOTICE: Air leaks must not appear in the suction line. If there is an air leak in the suction line, you will not be able to prime the pump. Use a thread sealant to seal air leaks. ITEM 69746 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10: Operation

    Water Pump without the Pump Housing FULL of water. Running the Water pump without water for an extended period of time will damage the Water pump and void the Warranty. Page 10 For technical questions, please call 1-888-866-5797. ITEM 69746...
  • Page 11: Starting The Engine

    Starting the Engine Before Starting the Engine Before starting the engine: a. Inspect the equipment and engine. b. Fill the engine with the proper amount and type of both fuel and oil. ITEM 69746 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12 Repeat until the engine starts. Note: Do not let the Starter Handle snap back against the engine. Hold it as it recoils so it doesn't hit the engine. Page 12 For technical questions, please call 1-888-866-5797. ITEM 69746...
  • Page 13: Stopping The Engine

    Slide the Throttle or Speed Control Lever to SLOW (the “turtle”). b. Turn the Engine Switch off. c. Close the Fuel Valve. NOTICE See “Long-Term Storage” on page 16 for complete storage instructions. ITEM 69746 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14: Maintenance

    4. Clean carbon build-up from combustion chamber Replace fuel line if necessary Service more frequently when used in dusty areas. These items should be serviced by a qualified technician. Page 14 For technical questions, please call 1-888-866-5797. ITEM 69746...
  • Page 15 Soak the filter in lightweight oil briefly, then squeeze out the excess oil. 3. Install the cleaned filter. Secure the Air Cleaner Cover before use. ITEM 69746 For technical questions, please call 1-888-866-5797. Page 15...
  • Page 16 Page 16 For technical questions, please call 1-888-866-5797. ITEM 69746...
  • Page 17: Pump Troubleshooting

    3. Clean Strainer. 4. Discharge hose damaged, too 4. Replace or adjust Discharge Hose. long or diameter too small. Follow all safety precautions whenever diagnosing or servicing the equipment or engine. ITEM 69746 For technical questions, please call 1-888-866-5797. Page 17...
  • Page 18: Troubleshooting

    4. Engine valves or tappets 4. Have qualified technician diagnose/ mis-adjusted or stuck. repair ignition system. Follow all safety precautions whenever diagnosing or servicing the equipment or engine. Page 18 For technical questions, please call 1-888-866-5797. ITEM 69746...
  • Page 19 3. Intake valve stuck or overheated engine. 3. Have qualified technician diagnose and service engine. 4. Incorrect timing. 4. Check engine timing. Follow all safety precautions whenever diagnosing or servicing the equipment or engine. ITEM 69746 For technical questions, please call 1-888-866-5797. Page 19...
  • Page 20: Warranties

    HFT. If you have any questions regarding your warranty rights and responsibilities, you should contact the Harbor Freight Tools Customer Service Department at 1-888-866-5797. Page 20 For technical questions, please call 1-888-866-5797. ITEM 69746...
  • Page 21 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. ITEM 69746 For technical questions, please call 1-888-866-5797. Page 21...
  • Page 22: Parts Lists And Diagrams

    Seat, Engine Frame Shock Absorption Shield,Lower Nut, Acorn Protector, Oil Bolt Switch Subassembly, Stop Engine Bolt Washer Bolt Bolt Collar Jacket, Rubber Bolt Valve, One Way Bolt Clamp Carburetor Assy. Hose, Fuel Steam Rubber Page 22 For technical questions, please call 1-888-866-5797. ITEM 69746...
  • Page 23 ITEM 69746 For technical questions, please call 1-888-866-5797. Page 23...
  • Page 24 3491 Mission Oaks Blvd. • pO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797...

Table of Contents