First Use - Smeg Oven User Manual

Improper use
Risk of damages to the appliance
• The hardness of the water used for
humidified cooking must not exceed 10-
11°F. Use tap water that has been
treated with a water purification or
softening system.

3.2 First use

1. Remove any protective film from the
outside or inside of the appliance,
including accessories.
2. Remove any labels (apart from the
technical data plate) from the
accessories and from the cooking
compartment.
3. Remove and wash all the appliance
accessories (if fitted) (see 4 Cleaning
and maintenance).
4. Heat the empty oven at the maximum
temperature to burn off any residues left
by the manufacturing process.
Use
Setting the power
Power should be set when
connecting the appliance to the
power supply for the first time. The
value set is saved and used
automatically whenever the oven is
switched on subsequently.
The maximum absorbed power value will
be displayed flashing after connecting the
appliance to the power supply.
From the OFF status hold the knob
down for at least 3 seconds if you
need to modify a parameter that
you have already set.
1. Turn the knob to
maximum absorbed power.
Selectable power values with
three-phase connection
8.3 kW ; 5.5 kW ; 3.0
single-phase and two-phase
connection
5.5 kW ; 3.0 kW
2. Press the knob to confirm the selection.
/ to select the
31