Using Bluetooth Devices - Siemens Gigaset SL910H User Manual

Using Bluetooth devices

Using Bluetooth devices
You can register up to five data devices (PC, PDA, mobile phones) and one Bluetooth headset. You
must activate Bluetooth on the handset, ensure the devices are visible if necessary and then register
the handset.
You can exchange Contacts entries using the data devices and load ringtones and pictures to the
handset using the Gigaset QuickSync software (
Please note
u A headset must have the headset or speaker profile. The speaker profile is preferred.
u Establishing a connection to a headset can take up to 5 seconds.
Activating/deactivating Bluetooth mode
You can activate/deactivate Bluetooth mode using the status page (
¤
In the Settings menu (
using the button to the right of Activation.
If Bluetooth is activated:
ò
u
is displayed in the status bar (
u The handset can communicate with all devices in
the Known Devices list.
u The handset is visible to Bluetooth devices within its
range.
u If the known devices include a headset, the handset
establishes a connection to this headset.
u The handset searches for Bluetooth devices in the
surrounding area (only if activated via the Settings
menu).
Finding and registering (trusting) Bluetooth
devices
The distance between the handset and the activated
Bluetooth device should be a maximum of 10 m.
Please note
u If you register a headset, any previously registered headset will be overwritten.
u If a headset is already registered to another device, please deactivate this connection before
starting the registration process.
Starting the search
The search is started when you open the Bluetooth submenu under Settings and Bluetooth is acti-
vated.
¤
Open the Devices found list: Touch
¤ Trusting the device
Select the device from the Devices found list.
the PIN of the device to be registered.
PIN for a data device: Enter any PIN on the handset and then also on the data device.
PIN for a headset: In general, 0000 is preset. For this reason, you only need to enter the PIN in excep-
tional cases.
If the Known Devices already contains 6 entries, the last entry is overwritten. Exception: A headset
only overwrites a headset.
26
¢
page 13), touch [
¢
page 4).
'
to the right of the list (see picture above).
¤
Adding the device to the known devices list
¤
¢
page 42).
¤
ò
Bluetooth].
L
Own Device
Anna's SL910H
Known Devices
Headset 1
Activation
Only displayed if Bluetooth is active
Devices found
Headset 2
Mobile 1
¤
ÿ
Touch [ Trust Device].
è
Confirm with .
¢
page 12) or as follows:
Activate/deactivate Bluetooth
Bluetooth
on
¤
If necessary, enter
M
M
M