Using The Handset On The Base; Registering A Handset To Another Gigaset Sl910/Sl910A Base; De-Registering The Handset; Changing The Base - Siemens Gigaset SL910H User Manual

Using the handset on the base

Registering a handset to another Gigaset SL910/SL910A base

You can register your handset on up to four bases.
You must initiate registration of the handset on the base (1) and on the handset (2). Once registration
is complete, the handset returns to idle status. If multiple handsets are registered, the internal
number of the handset is displayed in the display status bar, e.g., INT 1. If not, repeat the procedure.
¤
1) On the base
Press and hold the registration/paging key on the base (approx. 3 seconds).
2) On the handset (within 60 seconds) ¤
In the Settings menu (
¤ If the handset is already registered to four bases:
Touch the base where the registration should be overwritten, e.g., Base 2. The handset
searches for a base that is ready for registration.
¤
If necessary, enter the system PIN for the base (max. 8 digits) and confirm with

De-registering the handset

You want to de-register the handset currently being used. ¤
In the Settings menu (
¤
Touch De-register.
istration is confirmed with Yes.
¢
If the handset is still registered to other bases, it switches to the base with the best reception
(Best Base;

Changing the base

If your handset is registered to more than one base, you can set it to a particular base or to the base
that has the best reception (Best Base).
¤
¤ In the Settings menu (
Touch Connected to Base
¢
page 13), touch [
¢
page 13), touch [
¤
If necessary, enter the system PIN.
page 31).
¢
page 13), touch [
¤
'
. Select the desired base or Best Base (
Using the handset on the base
É
Handsets and Base] and then Register.
É
Handsets and Base].
¤
Confirm PIN with
É
Handsets and Base].
è
.
¤
è
. Handset de-reg-
Ø
= set).
31