Using Bluetooth Devices - Siemens Gigaset S685 User Manual

Using Bluetooth devices

Your Gigaset S68H handset can communi-
cate wirelessly via Bluetooth™ with other
devices using this technology.
Before you can use your Bluetooth
devices, you must first activate Bluetooth
and then register the devices to the hand-
set.
You can register 1 Bluetooth headset to
the handset. You can also register up to 5
data devices (PC, PDA) to send and receive
directory entries as vCards or to exchange
data with the computer (page 67).
In order to transfer phone numbers via
Bluetooth connections, it is essential that
area codes (international and local area
codes) are saved on the phone (see
page 57).
You will find a description of how to oper-
ate your Bluetooth devices in the user
guides for these devices.
Please note:
– You can only operate headsets on your
handset that have the headset profile.
– It can take up to 5 seconds to create a con-
nection between your handset and a Blue-
tooth headset. This applies both when a call
is accepted using the headset or transferred
to the headset, and when a number is
dialled from the headset.
Activating/deactivating Bluetooth
mode
¢ ¢
v í
Data Transfer
¢
Activation
Press to activate or deactivate Blue-
§OK§
‰
tooth mode ( = activated).
In idle status, the ò icon on the handset
shows that Bluetooth mode is activated:
Ð ò V
INT 1
¢
Bluetooth
Registering Bluetooth devices
The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be
no more than 10 m.
Please note:
– If you register a headset, any headset that is
already registered will be overwritten.
– If you would like to use a headset with your
handset that is already registered to
another device (e.g. to a mobile phone),
please deactivate this connection before
you start the registration process to the
Gigaset.
¢ ¢
v í
Data Transfer
¢
/
Search Headset Search Data Device
The search can take up to 30 seconds.
Once the device has been found, its name
will be shown on the display.
Press the display key.
§Options§
Select and press
Trust Device
~
Enter the PIN for the Bluetooth
device you want to register
and press
The device is saved in the list of known
devices.
Cancelling/repeating current search
To cancel search:
Press the display key.
§Cancel§
Repeat search if necessary:
Select and press
§Options§
Repeat Search
Select and press
Handset settings
¢
Bluetooth
.
§OK§
.
§OK§
.
§OK§
.
§OK§
55