Siemens Gigaset SL910H User Manual page 12

First steps
If the system PIN 0000 (default setting) is set on the base, the message "
appears. Skip the following step.
If the base system PIN is not 0000:
L
System PIN
1
4
7
This will start the installation wizard. If applicable, the values set on the base for the date, time, coun-
try, country code and local area code are displayed. You can also change the display language of the
handset.
The sequence of the installation wizard is described in the user guide for the Gigaset SL910 or
SL910A. Once the installation wizard has finished, the handset returns to idle status (
Handset in idle status
Once you have configured all the necessary settings, your handset switches to idle status. There are
three idle display pages (
¢
you can customise is displayed. Here, you can compile important functions and phone numbers for
quick access (
Ð
INT 1
Ä Å Ä
<
Â
Contacts
Your phone is now ready for use.
10
Registration
ç ‰
2 3
5 6
8 9
0
¢
page 11). When you first set up the phone, the configurable page that
page 32). Some are set by default.
V
>
April
28
Thursday
˜
Call List
¤
Using the keypad displayed, enter the system PIN
for the base.
¤ You can correct incorrect entries using
è
Touch after entering the PIN to complete the
entry.
After successful registration, the message
‰
" Handset registered" appears.
Status bar
Contains the internal handset name (e.g., INT 1; if multiple
handsets are registered) and icons that display the current
settings and the operating status of the phone.
To discover the meaning of the icons, see page 4.
Touch the status bar to display the status page (
Current date
Time
Open call lists
Open Contacts
‰
Handset registered"
$
.
¢
page 10).
¢
page 12).