Options; Entering Numbers And Text, Incorrect Entries - Siemens Gigaset SL910H User Manual

Options

Many display pages (especially lists like directories, call lists) have an option slider in the lower sec-
tion. This displays all the actions that you can apply in the current context.
¤
Touch an option to perform the corresponding action.
Example (moveable option slider):
<
˜
Calls
If all of the options cannot be displayed at the same time in one row, a moveable option slider is gen-
erally used. You can scroll horizontally using the option slider.
Moving the option slider (horizontal scrolling)
A moveable option slider is identified by an arrow to the right and/or left next to the options (see the
¤ picture above). The arrows indicate that there are additional options to those that are visible.
Place a finger on the right of the option slider and drag it to the left to view the options to the
¤ right on the display
Drag your finger from left to right to view the options to the left on the display
Showing/hiding two-line option slider
While establishing an external connection and during an external call, an option slider with two lines
is used instead of the moveable option slider.
If the space is not sufficient for the options available, the
¤
Touch to show further options.
¤
Touch to hide them again.

Entering numbers and text, incorrect entries

The appropriate keypads are displayed to enter numbers and text: An keypad (numerical keyboard)
for entering phone numbers or a system PIN; A (typewriter) keypad for entering text.
You use them to enter characters by touching the relevant character on the display. These then
appear in the text or number field displayed on the page.
If several number and/or text fields are displayed (e.g., First Name and Surname in a Contacts entry),
you must activate the field by touching it before writing. The flashing cursor is displayed in the acti-
vated field.
To avoid unnecessary incorrect entries: Touch a character on the keypad and this character is
enlarged. If the wrong character is enlarged, you can move your finger to the required character
(without lifting it from the display). The character is only copied to the text field once you lift your
finger from the display.
Correcting incorrect entries
$
Briefly touch
$
Press and hold
¤
Entering text
Touch the shift key
If upper case is activated, the keypad is shown in upper case letters, otherwise it is in lower case.
Upper case is only activated for the next character. Then lower case is automatically reactivated.
When editing a Contacts entry, the first letter and each letter following a space is automatically
in upper case.
 í
Contacts QuickDial
to delete the last character.
to delete the whole content of the number or text field.
to change between lower and upper case.
>
å
Internal
icon is displayed below the option slider.
Operating the handset
15