Setting The Alarm Clock; Using A Handset As A Room Monitor (Babyphone) - Gigaset S810H User Manual

Setting the Alarm Clock

Prerequisite: The date and time have already
been set (¢ page 11).
Activating/deactivating the Alarm
Clock and setting the wake-up time
á
v
¢ ¢ Alarm Clock
¤ You can enter data in the following fields:
Activation:
Select On or Off.
Time:
Enter the wake-up time in 4-digit format.
How often:
Select Daily or Monday-Friday.
Volume:
Set the volume (1–6).
Melody:
Select melody.
§Save§
Press the display key.
¼
In idle status, the icon and wake-up time
are displayed.
A wake-up call is signalled on the display and
with the selected ringtone (¢ page 2). The
wake-up call sounds for 60 seconds. If no key is
pressed, the wake-up call is repeated twice at
five minute intervals and then switched off.
While the wake-up call sounds, you can per-
manently change the volume by pressing the
ø
side keys (louder) or
During a call, the wake-up call is only signalled
by a short tone.
Deactivating the wake-up call/
repeating after a pause (Snooze mode)
Prerequisite: A wake-up call is sounding.
§OFF§
Press the display key. The wake-
up call is deactivated.
or
§Snooze§
Press the display key or any key.
The wake-up call is deactivated
and then repeated after 5 min-
utes. After the second repetition
the wake-up call is deactivated
completely.
÷
(quieter).
Using a handset as a
Room Monitor
(Babyphone)
If the Room Monitor is activated, a previously
saved destination number is called as soon as a
set noise level is reached. You can save an inter-
nal or external number in your handset as the
destination number. All of the handset keys are
deactivated, with the exception of the display
keys.
The Room Monitor call to an external number is
terminated after approximately 90 seconds.
The Room Monitor call to an internal number
(handset) is terminated after approximately 3
minutes (depending on the base). When the
Room Monitor is activated, all keys are locked
except the end call key. The handset's speaker
can be switched on or off (Two Way Talk = On
or Off). If Two Way Talk is switched on, you can
answer the room monitor call.
When the Room Monitor is activated, incoming
calls to the handset are indicated without a
ringtone and are only shown on the screen.
The display and keypad are not illuminated and
Advisory Tones are also turned off.
If you accept an incoming call, the Room Mon-
itor is suspended for the duration of the call,
but the function remains activated.
If you deactivate then reactivate the handset,
the Room Monitor remains activated.
Setting the Alarm Clock
31