Setting The Alarm Clock - Gigaset C610 User Manual

Setting the alarm clock

Setting the alarm clock
Prerequisite: the date and time have already been set.
Activating/deactivating the alarm clock and setting the wake-up
time
É
¢
v
¤
You can enter data in the following fields:
Activation:
Select On or Off.
Time:
Enter the wake-up time in 4-digit format.
Volume:
Set the volume (1–6).
Melody:
Select the melody.
§Save§
¼
The icon and wake up time are shown in idle status.
A wake-up call is shown on the display
ringtone melody. The wake-up call sounds for 60 seconds. If no key is pressed, the
wake-up call is repeated twice at five minute intervals and then switched off.
During a call, the wake-up call is only signalled by a short tone.
Deactivating the wake-up call/repeating after a pause (snooze
mode)
Prerequisite: a wake-up call is sounding.
§OFF§
Or
§Snooze§
138
¢
Alarm Clock
Press the display key.
Press the display key. The wake-up call is deactivated.
Press the display key or any key. The wake-up call is deactivated and
then repeated after 5 minutes. After the second repetition the wake-up
call is deactivated completely.
¢
( page 4) and signalled with the selected