Setting The Date And Time - Gigaset S810H User Manual

Setting the date and time

Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm can be used.
Date:
31.01.2011
Time:
00:00
Back
¤ Enter the hours and minutes as four digit
numbers via the keypad,
e.g.,
Change the input position with
the control key if necessary.
Calls Time
Date/Time
Save
QM 5
¤ Press the key below
screen to open the input field.
(If you have already set the time and date,
open the input field via the menu,
¢ page 20.)
The Date/Time submenu is shown on the
display.
¤ The active input position flashes.
Enter day, month and year as an 8-digit
number via the keypad,
4 Q2Q
e.g.,
for 14/10/2011.
Press the right or left control key to
change the input position and cor-
rect an entry.
¤ Press down on the control key to switch to
the Time input field.
for 07:15 am.
First steps
§Time§
on the display
Date/Time
Date:
14.10.2011
Time:
00:00
Back Save
11