Checking Base/Handset Service Information; Authorisation - Siemens Gigaset SL910A User Manual

Checking base/handset service information

Checking base/handset service information
You will need the service information when you call our hotline.
Base service information:
Prerequisite: You are trying to establish an external call or are conducting an exter-
nal call.
¤
Briefly touch any point in the status bar to show the required service information
in the display.
Handset service information:
Prerequisite: A call is not in progress.
¤
Briefly touch any point in the status bar and then touch Show Service Info
¢
( page 24).

Authorisation

This device is intended for analogue phone lines in the UK and on the Irish network.
Country-specific requirements have been taken into consideration.
We, Gigaset Communications GmbH, declare that this device meets the essential
requirements and other relevant regulations laid down in Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of Conformity is available at this Internet
address:
www.gigaset.com/docs
88