Connecting The Base With The Phone Network And The Mains Power Supply - Siemens Gigaset SL910A User Manual

Connecting the base with the phone network and the mains
power supply
A
Please note:
u
The power adapter must always be connected, as the phone will not operate
without a power supply.
u
Use only the power adapter and phone cord supplied. Pin connections on tele-
phone cables can vary (pin connections,
B
A
C
B
¤
Insert the phone cable (cable
slightly flattened) into the lower
connection socket
of the base.
¤
Insert the power cable for the
power adapter into the upper
connection socket
of the base.
¤
Insert both cables into the
appropriate cable channels
C
¤
First, connect the power adapter
A
¤
Then connect the phone jack
B
¢
page 94).
First steps
A
at the rear
B
at the rear
.
.
C
.
13