Setting Up The Sms Centre; Sms On A Pabx; Activating/Deactivating The Sms Function - Siemens Gigaset SL910A User Manual

Sending and receiving SMS messages (text messages)
u
Touch sender/number in the message text
Call the number or save in Contacts (
divided by a space. If it contains a special character (+ - / etc.), it is regarded as
two numbers. An attached mailbox identifier is added to Contacts.

Setting up the SMS centre

Phone numbers of at least one SMS centre must be saved in the device, otherwise
you cannot open the [
menu.
SMS messages are received from every entered SMS centre, as long as they are reg-
istered with their service provider. Your SMS messages are sent via the SMS service
centre that is entered as the active send service centre (
Entering/changing the SMS centre, setting the send centre
¤
Open the Settings menu (
¤ Ë
[
Touch ' next to an SMS centre.
¤
¤
Enter the phone number of the
SMS centre.
¤
If necessary, repeat the procedure for the
other SMS centres.
¤
Specify Active Send Centre: Touch the
number of the SMS centre (1 - 4) you wish
to use as the send centre at the top of
the display. For the SMS centres 2 to 4,
the setting only applies to the next SMS.

SMS on a PABX

u
Calling line identification must be forwarded to the extension of the PABX
(CLIP).
u
If necessary, the access code number must be prefixed to the number of the SMS
centre (depending on your PABX).
Test: Send an SMS to your own number, once with the access code and once
without.
u
If the SMS is sent without the extension number, it will not be possible for the
recipient to answer directly.
Sending and receiving SMS on ISDN PABXs is only possible via the MSN number
assigned to your base.

Activating/deactivating the SMS function

If you deactivate the SMS function, you cannot send or receive any further SMS
messages with your phone. All the settings and the entries in the inbox and draft
message list remain saved even after switching off.
52
·
Write Text Message] submenu in the Applications
¢
SMS Service Centres]
Confirm with è.
¤
¢
page 49). The number cannot be
L
page 25).
Active Send Centre
1
Service Centr.1
(Not configured)
Service Centr.2
(Not configured)
¢
page 52).
SMS Service Centres
2 3 4
M
M