Table of Contents
Advertisement
Service (Customer Care)
Forgotten system PIN.
¥
Reset the system PIN to 0000 (
The other party cannot hear you.
¥
The handset is "muted".
Unmute the microphone (
The number of the caller is not displayed although CLIP has been set.
¥
Calling Line Identification is not enabled.
The caller should ask the network provider to enable Calling Line Identification (CLI).
You hear an error tone when keying an input.
¥
Action has failed/invalid input.
Repeat the process.
Read the display and refer to the user guide if necessary.
You cannot listen to messages on the network mailbox.
¥
Your PABX is set to pulse dialling.
Set your PABX to tone dialling.
Gigaset SL910A only:
No time is specified for a message in the call list.
¥
Date/time have not been set.
Set the date/time (
The answering machine reports "Invalid PIN" during remote operation.
¥
1. You have entered the wrong system PIN.
Repeat input of system PIN.
¥
2. The system PIN is still set to 0000.
Set the system PIN to something other than 0000 (
The answering machine is not recording any messages/has switched to answer only
mode.
¥
The memory is full.
¥
Delete old messages.
Play back new messages and delete.
Exclusion of liability
The display on Gigaset SL910H has a resolution of 480x320 pixels, which is achieved
with the aid of 460,800 control elements. Each pixel consists of three sub-pixels
(red, green, blue).
It may be the case that a pixel is incorrectly controlled or has a colour deviation. This
is normal and no reason for a warranty claim.
The following table shows the number of pixel errors that may occur, without lead-
ing to a warranty claim.
Description
Colour illuminated sub-pixels
Dark sub-pixels
Total number of coloured and dark sub-pixels
84
¢
page 79).
¢
page 38).
¢
page 17).
¢
page 79).
Maximum number of permitted
pixel errors
1
1
1
Hide quick links:
Advertisement
Table of Contents
