Making Calls; Making An External Call; Accepting A Call - Siemens Gigaset SL910A User Manual

Making calls

Making calls

Making an external call

¤
Open the dial page, enter the number, briefly press c.
Or:
¤
Press and hold the c key in idle mode, then enter the number.
You can cancel dialling by pressing a.
Continuing a call on a headset
Bluetooth headset:
Prerequisite: Bluetooth is activated; the connection between the Bluetooth head-
set and the handset exists (
¤
Press the talk key on the headset.
It may take up to 5 seconds to establish a connection to the handset.
R
Use [
For further details about your headset, see the accompanying user guide.
Wire-bound headsets:
Prerequisite: The headset is connected to the handset (
¤
Press the push-to-talk key on the headset.
For more information, see the headset's user guide.
If a wire-bound headset and a Bluetooth headset are connected at the same
time, you are unable to use the wire-bound headset.

Accepting a call

You have the following options:
¤
Press c.
¤
Take the handset out of the charger, if Auto Answer is activated (
¤
Gigaset SL910A: Touch [
machine (
Accepting a call on a Bluetooth headset
Prerequisite: Bluetooth is activated; the connection between the Bluetooth head-
set and the handset exists (
Only press the talk key on the headset once the headset rings.
For further details about your headset, see the accompanying user guide.
36
¢
Volume] to adjust Headset Volume/Microphone Sensitivity.
Please note
­
¢
page 56).
¢
page 60).
Divert] to divert the call to the answering
page 60).
¢
page 7).
¢
page 76).