Changing The Base; Changing The Name Of A Handset; Making Internal Calls - Siemens Gigaset SL910A User Manual

Using multiple handsets

Changing the base

If your handset is registered to more than one base, you can set it to a particular
base or to the base that has the best reception (Best Base).
¤
In the Settings menu (
¤
Touch Connected to Base '.

Changing the name of a handset

The names "INT 1", "INT 2" etc. are assigned automatically on registration.
¤
In the Settings menu (
¤
Change name of handset you are using: Touch Rename.
Change name of another handset: Touch ' next to Registered Handsets.
¤
Select the handset.
¤
Delete the old name with $ and enter the new name (max. 10 alphanumerical
characters).

Making internal calls

Internal calls to other handsets registered to the same base are free of charge.
¤
Open the dial page (
the handset from the list or touch All Handsets.
After opening the list, press c to initiate a group call to all handsets.
Internal consultation/internal transfer
Prerequisite: You are conducting an external call. At least one other handset is reg-
istered to the base.
¤
Touch [
¤
If more than two handsets are registered to the base, select one handset or All.
Please note
If there are already two internal connections between the handsets/to the
answering machine (Gigaset SL910A), then an internal consultation call is not
possible.
Transferring (connecting) an external call to the other handset
You can transfer the external call either before the internal participant answers or
afterwards.
¤
Transfer external call: Press a.
If the internal participant does not answer or is busy, a recall from the external
participant occurs automatically (after approx. 30 seconds).
¤
Back to external call: Touch [
70
¢
page 25), touch [ É Handsets and Base].
¢
page 25), touch [ É Handsets and Base].
Confirm with è.
¤
¢
page 23).
P
Consultation] and then Internal.
¤
Select the desired base or Best Base (Ø = set).
Touch [ ‡ Internal].
¤
P
End Consultation].
¤
If necessary, select