Batteries - Remote Control; Connections; Antenna; Euro Av Connection (Scart) - Loewe ViewVision 8106 H Operating Instruction

First installation
Batteries – remote control
To insert or change the batteries press on the
arrow. Slide the battery compartment cover
downwards and remove it. Insert Alkali
Mangan LR 03 (AAA) batteries and ensure that
the + and – ends are connected correctly.
Slide the cover upwards to shut.
Information for the disposal of batteries:
The batteries provided in the
unit do not contain cadmium,
lead or mercury.
According to the Used Battery
Decree, batteries may no longer
be disposed of in household
rubbish. You can dispose of used
batteries at the commercially
provided collection points. Your
dealer will also have a collection
point for used batteries.
BA_VCR_31251_020EU_GB2
Connection

Antenna

Remove the antenna plug from your TV set and
insert it into the upper antenna socket
(ANTENNA) of the video recorder.
Using the cable supplied, connect the lower
antenna socket of the video recorder to the
antenna input of your TV set. This connection is
necessary to supply both the video recorder and
+
the television set with the antenna signal.
In addition, the video recorder has a transmitter
that transfers picture and sound and the menus
via the antenna cable to the TV set if there is no
Euro AV cable connection.
+

Euro AV connection (Scart)

Connect the lower Euro AV socket of the video
recorder to the Euro AV socket of your TV set. A
Euro AV cable is supplied with the set.
The Euro AV cable is the best way of making a
connection to your TV set. This will ensure the
best picture and sound quality. It also permits
the playing of HiFi stereo sound, and the
transmission of commands and data for Digital
Link and Digital Link Plus.
Use only a cable in which all contacts are
connected together (x 21, as in the cable
supplied).
For the new generation of Loewe TV sets
(MediaPlus) you must register the video recorder.
Use the Euro AV socket recommended by "AV
connections" or the connection assistant
"Connections". This information is provided in
the operating instructions of the TV set (see
"Operation of additional sets" – "Register set").
Your video recorder has Digital Link Plus and
Digital Link functions (you have to activate
Digital Link later on your video recorder, see
Page 24), you need this information when
registering your video recorder.
7
If you used the "Connections" connection
assistant for your Loewe TV set, then all station
data for terrestrial transmitters (not satellite
transmitters) is transferred to the recorder. For
this, the video recorder must be connected to
the mains. Follow the menus on the TV set.
Note: On the TV set all terrestrial and cable
stations can be found between station numbers
1 and 88.

Mains Supply

Connect the video recorder to a 230V/50 Hz
socket.
The mains plug should still be inserted even if
you are not using the video recorder, but wish
to watch television. If the video recorder mains
plug is removed, only a weak antenna signal is
fed to the TV, which can cause interference in
the TV picture.
DIG IN
1
SAT
SERVICE
IR
2
CTRL
SAT A/D DIG OUT
AUDIO IN
AV1 AV2/RGB AV3
R
AUDIO OUT
VHF/UHF L
SUR
C R
SUBWOOFER
L
STAND SUB
17.04.2003, 15:29 Uhr
ENTREE
ANTENNE
EURO AV2
DECODER
AUDIO
SORTIE OUT AERIAL
G L
SORTIE
EURO AV1
ANTENNE
AUDIO/
VIDEO
D R
RF OUT
7