Table of Contents
Advertisement
Settings for the video recorder
Decoder on the video recorder AV socket 2
A pay decoder is registered in the Loewe TV set,
as described on page 7. If you connect a pay TV
decoder to the Euro AV socket 2 (upper socket) of
the VCR, mark this with 'Yes' in the settings for
the menu item "Decoder at AV2". Select 'No' if
no pay TV decoder, satellite tuner or other video
recorder is connected.
M
Call up VCR menu
Highlight "Settings"
OK
Call up "Settings"
Highlight "Decoder at AV2" (via
"Others")
–––––––––––
./Settings
others ...
Child Lock
Autom. switch off
AV control Voltage
Decoder at AV2
Power save Standby
Select
and set
Select decoder "Yes/No"
On the video recorder, select each TV station one
after the other. Press the M key to call up the
VCR menu each time and highlight "Settings".
Press OK to call up "Settings" and highlight
"Decoder". Select "On". The decoder switches
on automatically if you switch to a pay TV station
and decodes the incoming signal.
–––––––––––
./Settings
Colour Standard
Stop at 000
Status Display
Picture Format
Decoder
Sharpness
others ...
Select
and set
BA_VCR_31251_020EU_GB2
Switch power save standby on/off
Using the O key, you can switch the video
recorder to standby. You can select either
"Normal" standby, in which the time and the
cassette symbol appear darker in the display (if a
cassette is inserted) or "Power save standby", in
which the display on the video recorder is
switched off.
M
OK
–––––––––––
On
Yes
On
No
Off
Back
M
End
E
If a Timer recording is programmed, the unit
always switches to normal standby with display
in the recorder, instead of power save standby.
–––––––––––
Autom.
On
On
Autom.
On
Normal
M
Back
E
End
23
Call up VCR menu
Highlight "Settings"
Call up "Settings"
–––––––––––
./Settings
–––––––––––
others ...
Child Lock
On
Autom. switch off
Yes
AV control Voltage
On
Decoder at AV2
No
Power save Standby
Off
Select
Back
M
and set
E
End
Highlight "Power save standby"
(via "Others")
Power save standby on/off
17.04.2003, 15:30 Uhr
Set transmitter channel of
the video recorder
If transmitter channel 36 of the video recorder
suffers interference from a TV station, then
another channel must be selected on both the
TV set and the video recorder.
Select it on the video recorder as follows:
Switch the video recorder to
standby (time is displayed)
Press both station keys on the
video recorder (under the flap)
P–
P+
together for four seconds
The selected transmitter
R F 3 6
channel is displayed on the
video recorder
Choose another channel
(– lower, + higher channel)
P–
P+
RF38
e.g. display on video recorder
Save this setting with the stop/
eject key on the video recorder.
Set the TV set for station number 0 to this
channel as well. Refer to the operating
instructions of your TV set. To find the
transmitter of the video recorder, start playing a
cassette or have it displayed by the VCR menu
by pressing the M key on the remote control of
the video recorder.
23
Hide quick links:
Advertisement
Table of Contents
