Switch On Digital Link On The 15 Video Recorder; Repeat First Installation - Loewe ViewVision 8106 H Operating Instruction

Settings for the video recorder
Switch on Digital Link on
the video recorder
Switch on Digital Link if you have connected
the video recorder to a Loewe TV set via a Euro
AV cable. The advantages are:
• the video recorder can be installed in a
concealed location;
• the video control bar of the Loewe TV can
be used;
• Timer recordings can be controlled from the
TV set (including Loewe TV sets without
Digital Link Plus. e.g. for recording from an
integrated satellite tuner.
To switch Digital Link on the video recorder on
and off:
Hold down the Pause key
+
then press P+
P+
Display on video recorder
L I N K
(Digital Link switched on).
or
Display on video recorder
F R O N T
(Operation via video recorder
switched on).
If the child lock is activated, Digital Link cannot
be switched on.
For timer recordings controlled from the Loewe
TV set the recording start time is established by
the TV set, and picture and sound are
transferred via the Euro AV cable to the video
recorder.
With Digital Link switched on point the VCR
remote control at the Loewe TV set. The
commands will be transferred to the video
recorder via the Euro AV cable. If two video
recorders are connected, you must select the
one you want to use before operating the video
recorder.
24
BA_VCR_31251_020EU_GB2
There are several ways of selecting the video
recorder to be used:
Via the video operating bar of the Loewe
TV set
Use the V= key to call up the video control bar,
and select with
operated. Using the E or V= key, close the video
control bar and operate the selected video
recorder via the TV set.
Via the AV selection of the Loewe TV set
Call up the AV selection with the 0 numerical
key.
hg hg
hg hg hg
Using the
the video recorder to be used is connected to.
You can now operate the selected video
,
recorder via the TV set.
Via the station list of the TV set
Using the OK key call up the station list of the
TV set.
Using the arrow keys
AV socket (AV1 or AV2) to which the video
recorder to be operated is connected (if a DVD
player is also connected, AV3) and press OK to
switch to the socket.
You can now operate the selected video
recorder via the TV set.
24
hg hg hg hg hg
keys directly the set to be
keys select the socket, which
< > < > < >
hg < > hg hg hg hg < >
highlight the
17.04.2003, 15:30 Uhr

Repeat first installation

It is worth repeating the first installation
procedure if you have moved house or the
video recorder is to be operated in conjunction
with another TV set.
To start the first installation:
Switch the video recorder to standby.
Keep the „on" key O on the
+
video recorder pressed down,
and press the play key on the
remote-control .
Display on video recorder
1.Ins t
(1.Inst = First Installation)
The video recorder switches on. The language
selection menu appears.
Select "your" language and continue with OK.
Enter the location of set if necessary. Confirm
again with OK.
Then carry out the station search procedure, as
necessary. Further information can be found on
Page 8.