Recording A Tv Broadcast; Insert Cassette Without Record Protection; Select Station; With The Arrow Keys Of The Remote Control - Loewe ViewVision 8106 H Operating Instruction

Daily operation

Recording a TV broadcast

Insert cassette without record protection

Insert a cassette without record
protection (tab still in place) into
VHS
the cassette compartment.

Select station

If you want to start the recording manually then
you must first select the television station on the
video recorder. If recording is in progress, it is not
possible to change the station on the video
recorder. The selected station is shown in the
display on the video recorder.
... with the arrow keys on the remote control
Station up/down
ZDF
Display on video recorder
... with the numerical keys of the remote
control
1 digitstation
Press keys 0 – 9 for one second,
and the station changes
instantly.
7
or press keys 0 – 9 briefly, and
the station will change after
long
two seconds.
2 digit station
2 7
Press the two numerical keys
quickly one after the other and
short short
the station changes.

... via the station list

Call up station list.
OK
––––––––––– Station list
AVS
AV3
AV2
AV1
01 ARD
02 ZDF
03 WDR
Select, change
OK
with OK
12
BA_VCR_31251_020EU_GB2
OK
...on the video recorder
P– P+

Select recording speed

Use the LP key on the remote control to select the
recording speed. "Standard-Play"(SP) is normally
used. If you select "Long Play" (LP), the recording
time of the cassette is doubled.
LP
LP or SP for a cassette without record protection
is shown in the display of the video recorder and
in the status display. For Long Play (LP), the
picture and sound quality will be reduced. When
playing, the video recorder will detect the
recording speed.

Start recording

You can start the recording by using the remote
control or on the video recorder.

... using the remote control

+
Note: if Digital Link Plus is active and the video
recorder is on standby, the station selected on the
TV will be recorded.
...on the video recorder
REC
––––––––––
R e c o r d
04 BR
05 HR
0 : 00 : 1 2
06 N 3
07 MDR 3
08 BR-AL
09 PHOEN
The red REC display appears on the video recorder
10 3SAT
display when recording is in process.
Back
M
End
E
12
Highlight station
Switch to highlighted station
with the keys P+ and P– under the
flap.
Press the key to switch between
SP and LP.
Keep the record key pressed,
then press the play key .
Open the flap.
Press the record key REC.
Display on video recorder
Tape counter display on VCR
17.04.2003, 15:29 Uhr

Limit recording time

After starting the recording you can limit the
recording time in 30 minutes steps.
Keep the record key
+
when recording, then press the
play key .
0 : 3 0
Display on video recorder
1:00
on next press on etc.
You can set up to 4 hours 30 minutes recording
time, for Long Play up to 9 hours. Finally, the
remaining recording time is displayed.

Interrupt recording

You can interrupt the recording for a maximum
of five minutes, by pressing the Pause key . The
tape is stopped in front of the rotating video
heads. On re-pressing the Pause key
recording continues without noticeable
interference.
Pause recording
Continue recording.
If five minutes pause is exceeded the video
recorder switches automatically to STOP.
During a pause in recording, the station for the
video recorder can be switched. The recording
can also be continued by re-starting recording.

End recording

End recording (STOP)
When the tape reaches the end, the recording
stops and the tape is rewound and ejected.
pressed
the