Settings; Colour Standard; Switch On/Off Memory Stop At 000 - Loewe ViewVision 8106 H Operating Instruction

Settings for video recorder
Download stations from the TV
If you have made changes to antenna or cable
(not satellite) stations on the attached TV set, the
new station data must be transferred to the video
recorder (for TV sets with Digital Link Plus or
comparable systems from other manufacturers).
This ensures that for direct and Timer recordings
the video recorder records the correct station.
To transfer the station data from the TV set:
M
Call up VCR menu
Highlight "Stations"
OK
Call up "Stations"
Highlight "Download from TV"
––––––––––– ./Stations
Location of Set
Automatic Search
Manual Adjustment
Sort/Delete
Download from TV
Select and
OK
proceed with OK
OK Call up "Download from TV"
–––––– ../Download from TV
Digital Link Plus
transmission,
please wait!
D L P Display on video recorder during
data transfer.
The transfer of the station data starts
immediately. To cancel, use the E key.
20
BA_VCR_31251_020EU_GB2

Settings

Behind the menu item "settings" in the VCR
menu you will find a number of settings for the
video recorder.

Colour standard

By default, the colour standard used is the one
that was recorded. The video recorder
recognises the standard automatically.
If the video recorder does not recognise the
colour standard, you must set it manually. You
can switch between Autom., PAL and
MESECAM as follows.
M
–––––––––––
Back
M
End
E
OK
––––––
E Cancel
20
Call up VCR menu
Highlight "Settings"
–––––––––– VCR-Menu ––––––––––
Timer list
Special info
Time and date
Stations
Settings
Language
Select and Back
M
OK
proceed with OK End
E
Call up "Settings"
Highlight "Colour Standard"
––––––––––– ./Settings –––––––––––
Colour Standard Autom.
Stop at 000 On
Status Display On
Picture Format Autom.
Decoder On
Sharpness Normal
others ...
Select Back
M
and set End
E
Select colour standard",
Autom", "PAL" or "MESECAM"
17.04.2003, 15:30 Uhr

Switch on/off memory stop at 000

Using the 000 key you can set the counter to
zero at any point when the tape is running e.g.
at the start of a new recording. When the tape
is wound backwards, it will stop at 000, if
"Stop at 000" is set to "On".
M
Call up VCR menu
Highlight "Settings"
Call up "Settings"
OK
Highlight "Stop at 000"
––––––––––– ./Settings –––––––––––
Colour Standard
Stop at 000
Status Display
Picture Format
Decoder
Sharpness
others ...
Select
and set
Switch on/off Stop at 000
Autom.
On
On
Autom.
Off
Normal
Back
M
E End