Welcome; About This Equipment; Advantages Of Connection To A Loewe Tv Set - Loewe ViewVision 8106 H Operating Instruction

Welcome

Thank you
for choosing a Loewe product.
We are happy to welcome you as a customer.
At Loewe we combine the highest standards of
technology, design and user friendliness. This
applies equally to videos, TVs, HiFis and
accessories.
Neither technology nor design is an end in
itself, but both are intended to provide our
customers with the best possible audio and
visual experience.
Our design is not influenced by short-term,
fashionable trends. Instead, you get a high-
quality set that you will never tire of looking at.

About this equipment

The video recorder is best operated with the
remote control provided; this can also be used
to operate Loewe TV sets and Loewe DVD
players.
ShowView is incorporated for easy
programming of Timer recordings.
VPS ensures that any alterations to the timing
of broadcasts you wish to record are taken into
consideration in the Start and End Recording
commands
BA_VCR_31251_020EU_GB2
Advantages of connection
to a Loewe TV set
Just like the video recorder, Loewe TV sets
incorporating the MediaPlus chassis are
equipped with Digital Link and Digital Link Plus.
Both systems control the video recorder via the
Euro AV cable.
With Digital Link you can install the video
recorder in an enclosed rack or wall unit,
without the video recorder being visible. The
VCR remote control operates the video recorder
via the Loewe TV set. To do this, Digital Link
must be switched on at the video recorder (see
Page 24).
Using the video control bar on the Loewe TV
set, you can also operate the most important
functions of the video recorder without using
the VCR remote control.
Should you wish to carry out Timer recordings
from the satellite tuner of the TV set, Digital
Link will control the recording.
With Digital Link Plus, the station data of
antenna and cable stations can be transferred
from the TV set to the video recorder, so that
the same stations appear at the same station
positions in both sets.
In this way, Timer recordings from antenna and
cable stations can be easily programmed with
the EPG (Electronic Programme Guide) on the
TV set. The Timer data is transferred to the
video recorder, which then carries out the Timer
recording independently of the TV set. In the
case of timer data for satellite broadcasts, the
TV set will start and stop the video recorder
and set it to the Euro AV 1 input.
Start of play is shown immediately on the TV
set, regardless of which station you are
watching. If the TV set is off it will be switched
on.
5 17.04.2003, 15:29 Uhr
5