Channel Modules - Yamaha MT4X User Manual

Channel Modules

GAIN control
This rotary control adjusts the level of the signal from a
microphone or instrument plugged into the MIC/LINE
INPUT connector
Equalizer controls
These rotary controls are used to adjust the high, middle
and low band frequency levels. To help you select the
"flat" setting easily, each control has a centre-detent at the
"0" position.
HIGH
MID
LOW
AUX controls
This rotary control is used to send the channel signal after the fader
auxiliary send buses. Rotated fully counter-clockwise sends the signal to the AUX 1
bus, fully clockwise to the AUX 2 bus. In the centre-detent "0" position, no signal is
sent to either bus.
ASSIGN keys
These keys are used to select the group bus.
l-ASSIGN-2
3-ASSIGN-4
Use the PAN control
PAN control
This rotary control sets the stereo pan position of the channel signal. It is also used
to select the individual track groups for recording.
User's Guide
Controls and Connections
±12 dB at 12kHz-shelving
±12 dB at 1kHz-peaking
±12 dB at 80Hz-shelving
selects the first track group - groups 1 and 2.
selects the second track group - groups 3 and 4.
to select the individual track groups.
6
to the