Yamaha MT4X User Manual page 31

If required, add effects using the AUX SEND and AUX RETURN controls and
connectors. Adjust the effects for each channel.
Note: You cannot apply effects to the individual tracks nor can you adjust the sound
balance once you have mixed them onto a single track. You must apply any effects, and
adjust the equalization and balance, during the bounce-down recording.
9) Press the RETURN TO ZERO key to stop and rewind the tape.
Recording
10) Press the REC/PAUSE key.
The indicator over the key lights and the REC SELECT - TRACK indicators will be
illuminated.
11) Press the PLAY key to start recording.
The indicator above the key lights and the MT4X starts the tape.
12) When the recording is finished, press the RETURN TO ZERO key to stop and
rewind the tape.
The indicators over the REC/PAUSE and PLAY keys switch off and the
REC SELECT - TRACK indicators resume flashing.
Check the recording
13) Release the MONITOR SELECT - GROUP key corresponding to the destination
track and press the CUE key.
14) Adjust the CUE LEVEL control of the newly-recorded destination track.
15) Press the PLAY key to start playback of the tape.
If the resulting recording needs to be redone, repeat from step 6.
Overdubbing/ping-pong recording
User's Guide
Recording Functions
Bassguitar track
Guitar track
Drum track
30
(Bassguitar track)
(Guitar track)
(Drum track)
Synth & Rhythm track