Channel Modules6 - Yamaha MT4X User Manual

Channel Modules
1
GAIN control
This rotary control adjusts the level of the signal from a microphone or
instrument plugged into the MIC/LINE INPUT connector (
2
Equalizer controls
These rotary controls are used to adjust the high, middle and low band
frequency levels. To help you select the "flat" setting easily, each control
has a centre-detent at the "0" position.
HIGH
MID
LOW
15
10
–5
–10
–15
3
AUX controls
This rotary control is used to send the channel signal after the fader (
Rotated fully counter-clockwise sends the signal to the AUX 1 bus, fully clockwise to the AUX 2 bus.
In the centre-detent "0" position, no signal is sent to either bus.
4
ASSIGN keys
These keys are used to select the group bus.
1-ASSIGN-2
3-ASSIGN-4
Use the PAN control (
5
PAN control
This rotary control sets the stereo pan position of the channel signal. It is also used to select the
individual track groups for recording.
User's Guide
12 dB at 12kHz - shelving
12 dB at 1kHz - peaking
12 dB at 80Hz - shelving
5
0
20 50 100 200 500 1k
FREQUENCY (Hz)
selects the first track group - groups 1 and 2.
1 2
selects the second track group - groups 3 and 4.
3 4
5
) to select the individual track groups.
Controls and Connections
2k 5k 10k 20k
1
h
).
2
3
4
5
6
7
7
) to the auxiliary send buses.
6
1
MIC/LINE
GAIN
LINE MIC
0
HIGH
-12 +12
0
MID
-12 +12
0
LOW
-12 +12
0
AUX
AUX 1 AUX 2
1 2
ASSIGN
3 4
C
PAN
L R
ODD EVEN
TAPE MIC/
LINE
10
9
8
7
6
5
4
3
2
1
0