Front Panel Connections; Rear Panel Connections - Yamaha MT4X User Manual

REPEAT indicator
This indicator illuminates while the repeat function is active.
REC SELECT - TRACK indicators
These indicators flash when you arm the corresponding trade by pressing one of the
REC SELECT keys
when you press the REC/PAUSE key

Front Panel Connections

PHONES connector
This 1/4" phone connector is used for a pair of
stereo headphones (8
PUNCH I/O footswitch connector
This connector is used to plug in an optional
footswitch (FC5) for punch-in/out recording. See
"Using the optional footswitch" on page 28.

Rear Panel Connections

MONITOR OUT connections
• Output impedance: 1
• Nominal output level: -10 dB (at 10
These RCA/Phono connectors are used to plug in a monitor amplifier or powered
loudspeakers. The same signal which is output from the PHONES connector
also output from these connectors.
STEREO OUT connections
Output impedance: 1
Nominal output level: -10 dB (at 10
These RCA/Phono connectors are used to output the final stereo mixdown to the
master recorder — typically, a stereo tape deck
MIC/LINE INPUT connections
Input impedance: 10
Nominal input level: -10 dB to -50 dB
These 1/4" phone connectors are used to input microphones, electronic
instruments, and line-level sources.
User's Guide
Controls and Connections
The armed indicators switch from flashing to illuminated
to 40
load)
load)
12
is