Troubleshooting - Siemens HB280 Series Operating Instructions Manual

Glass cover for the oven
light
Notes
Cleaning the plating rack

Troubleshooting

q Wipe the oven down thoroughly.
It is best to clean the glass cover in the oven with
soapy water.
The oven is enamelled. Enamel has to be burnt on at
very high temperatures. This can cause some slight
colour variation.
The edges of thin trays can be rough as they cannot
be completely enamelled. The anti corrosion
protection is guaranteed.
Unhook the racks and clean them using a detergent
solution and sponge or nylon cleaning sponge for
stubborn dirt. Reinstall the racks once they have been
cleaned.
Should a malfunction occur, it is often only due to a
minor fault. Please read the following instructions
before calling the after sales service:
29