Installing The Batteries; Using The Remote Control - Strong PRIMA User Manual

Digital free-to-air terrestrial receiver

Hide thumbs Also See for PRIMA:

Table of Contents

2.3 Installing the Batteries

Remove the battery cover from the remote control and put 2XAAA size batteries

inside the compartment.

The diagram inside the battery compartment shows the correct way to install the

batteries.

1.Open the cover

To use the remote control, point it towards the front of the digital receiver

The remote control has a range of up to 7 metres from the receiver at an angle

of up to 60 degrees.

The remote control will not operate if its path is blocked.

Sunlight or very bright light will decrease the sensitivity of the remote

control.

2.Install batteries

4 4

3.Close the cover

Table of Contents