SSANGYONG ACTYON Owner's Manual page 73

Accelerating with the Cruise Control System
0
• While the cruise control system is running
1
1. Push up the ACCEL switch of the cruise control lever and
2
hold it until the desired speed is reached without an ac-
celerator pedal intervention.
3
2. When the desired speed is reached, release the lever.
4
• While the cruise control system is not running
5
1. Accelerate using the accelerator pedal over 40 km/h.
6
2. Push up the ACCEL switch of the cruise control lever and
hold it.
7
3. And then release the accelerator pedal slowly.
8 4. When the desired speed is reached, release the lever.
9 • Tap-up while the cruise control system is running
1. Push up the ACCEL switch of the cruise control lever less
10
than 0.5 second per one switching while the cruise con-
11
trol system is running. This is a tap-up switching.
2. When you operate a tap-up switching, the vehicle is ac-
12
celerated for 1 km/h over the previous set speed.
13 3. If you want to accelerate for 13 km/h, operate the tap-up
switching 13 times without accelerating with the cruise
14
control system.
15
16
4-12
INTERIOR SWITCHES
Page 12
Decelerating with the Cruise Control System
• While the cruise control system is running
1. Push down the DECEL switch of the cruise control lever
and hold it until the desired speed is reached without a
brake pedal intervention. But the cruise control system
cannot maintain the cruise function at less than 35 km/h.
2. When the desired speed is reached, release the lever.
• When the cruise control system is not running
1. Push down the DECEL switch of the cruise control lever
and hold it.
2. And then release the accelerator pedal slowly.
3. When the desired speed is reached, release the lever.
But the cruise control system cannot maintain the cruise
function at less than 35 km/h.
• Tap-down while the cruise control system is running
1. Push down the DECEL switch of the cruise control lever
less than 0.5 second per one switching while the cruise
control system is running. This is a tap-down switching.
2. When you operate a tap-down switching, the vehicle is
decelerated for 1 km/h below the previous set speed.
3. If you want to decelerate for 10 km/h, operate the tap-down
switching ten times without the brake pedal intervention.
2006-10-02, ¿ÀÈÄ 3:06