Sms On A Pabx; Activating/Deactivating First Ringer Muting; Activating/Deactivating Sms Function - Siemens Gigaset A580 IP Manual

SMS (text messages)

SMS on a PABX

u
You can only receive an SMS when the Calling Line Identification is forwarded
to the extension of the PABX (CLIP). The CLIP evaluation of the phone number
for the SMS centre takes place in your Gigaset.
u
Depending on your PABX, you may have to add the access code (external line
prefix) before the number of the SMS centre.
If in doubt, test your PABX, e.g. by sending an SMS to your own number: once
with and once without the access code.
u
When you send SMS messages, your sender number may be sent without your
extension number. In this case the recipient cannot reply to you directly.
Sending and receiving SMS messages on ISDN PABXs is only possible via the MSN
number assigned to your base station.

Activating/deactivating first ringer muting

§Menu§
M 4 O O
Q
§OK§
Or:
§OK§

Activating/deactivating SMS function

If you deactivate the SMS function, you cannot send or receive any SMS messages
with your phone.
The settings you have made for sending and receiving SMS messages
(e.g. the numbers of the SMS centres) and the entries in the incoming and draft
message lists are saved even after deactivation.
§Menu§
M 4 O 2 L
Q
§OK§
Or:
§OK§
74
Press the display key.
Press keys.
Make the first ring audible.
Mute the first ring.
Press the display key.
Enter the digits.
Deactivate SMS function.
Activate SMS function (default setting).