MANUAL FLASH
When the camera is set to manual exposure,
manual flash can be set to suit the subject distance
and aperture. The manual flash output can be set to
1/1, 1/2, 1/4, 1/8, 1/16, or 1/32.
Manual flash mode can be used with Manual and B
mode of GX cameras.
❷
❹
❺
❸
❻
❶
■ Procedure
1
Turn on the power switch.
2
Press the flash mode button [MODE] to display
[M] [1/xx] on the LCD panel.
• You can set the flash output from 1/1 to
1/32. See page 39.
• If the camera is set to Manual or B mode
and the flash mode is set to Trailing-
shutter-curtain sync mode, the flash
mode is set as P-TTL mode automatically.
3
In the Auto zoom mode, the zoom will
correspond with the camera automatically.
In the Manual zoom mode, set the zoom
4
Set the flash zoom position to match the
camera focal length.
《25》