Samsung SEF-36PZF User Manual page 37

Using two SEF-36PZF flash units with one
attached to the camera
• The two flash units must be set to the same
channel. (p.41)
• Set the wireless mode as SLAVE 1. (p.42)
Flash unit on camera
1
Attach the SEF-36PZF flash unit to the camera.
❶ Set the flash unit's power switch to
WIRELESS.
❷ Set the wireless mode switch to [C] or [M].
• The flash mode is fixed as P-TTL.
• If the wireless mode switch is set to [C], you
can use the high-speed sync mode and Higher
F No. is selected (Lower exposure), flash sync
may not be activated.
• The trailing-shutter-curtain sync flash can't be
used. If it is selected, leading-shutter-curtain
sync mode will be selected automatically.
《37》