Table of Contents
Advertisement
BOUNCE FLASH
With the SEF-36PZF, you can tilt the flash head up
or down to aim at the ceiling or wall to bounce the
flash before it reaches the subject. Doing so creates
softer light and shadows to make the picture look
more natural. However, bouncing the flash will
decrease the flash intensity by the time it reaches
the subject. Therefore, use the P-TTL or TTL auto
flash mode with bounce flash to ensure a correct
exposure. The maximum upward bounce angle is
90° (click stops at 45°, 60°, 75°, 90°), and the
maximum downward bounce angle is -10°. At the 0°
angle, there is a locking mechanism. So when you
want to tilt the flash head up or down, hold down the
lock release button on the side of the flash head,
then tilt the head up or down.
During bounce flash, [
LCD panel. Also, the effective flash range will not be
displayed.
• When the bounce angle is set to downward at-
10° the effective flash range will blink.
] will be displayed on the
P-TTL Auto Flash Photography
The amount of reflective light will change according
to the condition of the reflective surface, angle, and
distance.
Confirm the flash confirmation indicator in the
viewfinder or the flash unit's flash light confirmation
display after taking pictures.
Manual Flash Photography
The
amount
of
light
photography is greatly affected by the condition of
the reflective surface, therefore test pictures should
be taken beforehand or the changing the exposure
and taking several pictures may be recommended.
• When taking color photographs, if the
reflective surface for the bounce flash is
colored, the picture will be affected by the
color and unless this is intentional, a white
surface should be used.
• Bounce flash photography is greatly affected
by the surrounding conditions. A photography
manual
and
other
recommended.
during
bounce
flash
references
are
《43》
Hide quick links:
Advertisement
Table of Contents
