NOTES ON THE POWER SUPPLY
Sliding the Power Switch to the ON position will turn ON the power, sliding it to the OFF position will turn OFF
the power.
《14》
• Please refer to page 34 for the WIRELESS
MODE position.
• When the power is turned OFF and ON again,
the flash mode will be set to P-TTL and the
Zoom position A.
Auto Power Off Function
When the flash unit is left unused for about 3
minutes with the power switch set to the [ON]
position, its power automatically switches off to
save on power. To restart charging of the flash
unit, turn ON the power. If the flash unit is
mounted on the cameras, press the shutter
release button lightly to turn ON the power.
• The power will shut off after approximately 6
minutes only when set to auto flash mode
[A].
• During wireless flash operation, the power
will turn off after about 1 hour of non
operation.