Modeling Flash/Test Flash - Samsung SEF-36PZF User Manual

MODELING FLASH/TEST FLASH

Before taking the picture, firing a modeling flash helps
you to see how shadows are cast on the subject.
■ Procedure
1
Slide the setting switch down [yellow dot].
2
Check that the flash is ready and then press
the MODELING button. The flash will fire
continuously for one second.
3
After firing the modeling flash, slide the setting
switch up [white dot].
• To prevent the flash tube from overheating or
deteriorating, do not fire the modeling flash
more than 10 consecutive times. After the
tenth time, let the flash unit rest for at least 10
minutes.
■ Test flash
Check that the flash is ready and then press the
TEST button. The test flash can be operated.
《45》