Samsung SEF-36PZF User Manual page 22

4
Check the effective flash range and that the
flash is ready. Then take the picture.
5
If you are too close to the subject, the correct
flash exposure will not be obtained even if the
flash confirmation indicator blinks. Be sure to
check the effective flash range on the LCD
panel.
• If necessary, an exposure compensation
amount can be set between +1.0 to -3.0 stops
in 0.5-stop increments. (p.39)
• Cameras other than GX cameras will display
P-TTL but are not compatible with P-TTL.
Please use the auto flash mode.
• We recommend using the GX series camera.
Using cameras other than GX camera is not
covered by the Samsung warranty.
《22》
Display of Flash Effective Range
The shooting distance parameters will be displayed
on the LCD panel. Make sure that you are within the
flash effective range before taking pictures.
If the flash effective range is over 22m, [▶] will
display and under 0.7m, ■ will display on the LCD
panel.
• The flash effective range varies depending on
an ISO speed, lens aperture in use, and/or the
zooming position (flash coverage angle).
When using a zoom lens, keep in mind the
maximum aperture of the zoom lens changes
when the lens zooms in and out.