Flash Select Setting For Pbx - Sharp UX-BD80 Operation Manual

Flash Select Setting for PBX

Note: This setting is normally only used in Germany. In other countries, you
can try changing the setting if you encounter difficulty with the default setting.
If your fax machine is connected to a PBX and the PBX uses the "Flash"
method to connect to an outside line, you must select the appropriate Flash
Select setting depending on whether your PBX line is a normal telephone line
or a high-speed line.
1
Press once and
2
Press once and
3
Press once.
4
Select (SHORT TIME) if your PBX
line is a normal telephone line.
Select (LONG TIME) if your PBX
line is a high-speed line.
5
Press to return to the date and time display.
Flash Select Setting for PBX
Display:
4 times.
4 times.
OPTION SETTING
FLASH SELECT
FLASH SELECT
1: SHORT TIME
The display briefly shows
your selection, then:
FAX SIGNAL RX
39