Sending A Fax By Automatic Dialling - Sharp UX-BD80 Operation Manual

4
Wait for the connection. Depending on the setting of the receiving
machine, you will either hear a fax tone or the other person will answer.
•
If the other person answers, ask them to press their Start key (speak facing
the operation panel at a distance of about 50 cm to 1m). This causes the
receiving machine to issue a fax tone.
5
When you hear the fax tone, press
•
Important: Remove the document as soon as it exits the machine.
Otherwise, ink from received faxes and copies may soil the document.
•
If the transmission is completed successfully, the machine will beep once.
•
If an error occurs, the machine will beep three times and print a Transaction
Report to inform you of the problem (see page 146).
Note: If the transmission is unsuccessful and DOCUMENT JAMMED appears
in the display, remove the document as explained on page 170. (This may
occur if the other fax machine doesn't respond properly when you attempt to
send the document.)

Sending a Fax by Automatic Dialling

You can store up to 30 fax, phone, or SMS numbers in the machine for
automatic dialling.
♦
Auto-dial numbers are dialled by pressing
appears in the display, and then
Storing fax, phone, and SMS numbers for auto dialling
1
Press once and
Sending a Fax by Automatic Dialling
START/
MEMORY .
START/
MEMORY .
Display:
once.
until the desired number
<NEW NUMBER>
111