If The Memory Becomes Full - Sharp UX-BD80 Operation Manual

Sending a Fax From Memory

If the memory becomes full...

If the memory becomes full while the document is being scanned, FAX
MEMORY FULL will appear in the display.
START/
♦
Press MEMORY
to that point in memory. The remaining pages will be ejected from the
feeder. After transmission, the memory will be cleared and you can transmit
the remaining pages. You will also need to transmit the page which was
being scanned when the memory filled up.
♦
Press
124
if you want to transmit the pages which have been stored up
if you want to cancel the entire transmission.