Table of Contents
Advertisement
Flash Select Setting for PBX
Note: This setting is normally only used in Germany. In other countries, you
can try changing the setting if you encounter difficulty with the default setting.
If your fax machine is connected to a PBX and the PBX uses the "Flash"
method to connect to an outside line, you must select the appropriate Flash
Select setting depending on whether your PBX line is a normal telephone line
or an ISDN line (or other high-speed line).
1
FUNCTION
Press
2
Press
once and
3
Press
once.
4
Select
(SHORT TIME) if your PBX
1
line is a normal telephone line.
Select
(LONG TIME) if your PBX
2
line is an ISDN line (or other high-
speed line).
5
STOP
Press
once and
twice.
3 times.
to return to the date and time display.
Flash Select Setting for PBX
Display:
OPTION SETTING
FLASH SELECT
1: SHORT TIME
The display briefly shows
your selection, then:
FAX SIGNAL RX
35
Advertisement
Table of Contents
